ARRMA #AR390069 BLX100 Brushless 3S ESC
Fitted with a super-reliable EC5 connector and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX100 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 12AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
SPECIFICATION
Battery usage | 2S LiPo (7.4V) or 3S LiPo (11.1) / 4-9 Cell NiMH |
Low Voltage Cut-Off (LVC) | 3.4V per cell |
Thermal Protection Temperature | 125°C / 257°F |
Over-Voltage Protection | Over 12.6V |
BEC Voltage | 6V |
BEC Current | 4A |
ESC Length | 43mm / 1.69" |
ESC Height | 34mm / 1.34" |
ESC Width | 54.5mm / 2.15" (Including hold-down tabs) |
ESC Weight | 120g / 4.2oz |
Receiver Wire Length | 170mm / 6.70" |
Battery Wire Length | 125mm / 4.92" |
Motor Wire Length (Including Connector) | 200mm / 7.87" |
Switch Length | 110mm / 4.33" |
Switch Width | 12.8mm / 0.5" |
Switch Height | 18mm / 0.71" |
Motor Bullet Connector Size | 4mm / 0.16" |
Wire Specifications | 12AWG |
ESC Battery Connector Type | EC5 |