Only 2 left in stock
close
ARRMA # AR390211 BLX185 6S ESC
The BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with super-reliable XT-90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - Per battery pack
3S, 4S and 6S LiPo Compatibility
BLX185 SPECIFICATIONS
POWER TYPE BLX Brushless Extreme Performance
ESC TYPE 150AMP Continuous current capacity
BATTERY USAGE 3S LiPo (11.1), 4S LiPo (14.8) or 6S LiPo (22.2V) Stick Pack
LOW VOLTAGE CUT-OFF (LVC) 3.2V per cell
THERMAL PROTECTION TEMPERATURE 105°C / 221°F
OVER-VOLTAGE PROTECTION Over 6S LiPo (25.2V)
BEC VOLTAGE 6V
BEC CURRENT 3A
ESC LENGTH 57.5mm / 2.26"
ESC HEIGHT 38.9mm / 1.53"
ESC WIDTH 59.5mm / 2.34" (Including hold-down tabs)
ESC WEIGHT 196g / 6.91oz
RECEIVER WIRE LENGTH 200mm / 7.87"
BATTERY WIRE LENGTH 165mm / 6.5"
MOTOR WIRE LENGTH (INCLUDING CONNECTOR) 130mm / 5.12"
SWITCH LENGTH 29.3mm / 1.15"
SWITCH WIDTH 12.8mm / 0.5"
SWITCH HEIGHT 18mm / 0.71"
MOTOR BULLET CONNECTOR SIZE 4mm / 0.16"
WIRE SPECIFICATIONS 10AWG
ESC BATTERY CONNECTOR TYPE XT90
