Axial #AXI90074T1 1/10 Wraith 1.9 4WD RTR
Specifications:
Type: Crawler
Scale: 1/10
Length: 17.8" (451.6mm)
Width: 8.8" (223.3mm)
Height: 8.8" (223.3mm)
Ground Clearance: 2.73" (69.4mm)
Wheelbase: 12.13" (308mm)
Weight: 4.65lb (2.1kg)
Chassis: Full tube frame constructed of high-strength impact resistant composite plastic, new chassis design moves battery tray to front for easier access and better weight distribution, new lower rails and skid plates are narrower for added clearance
Suspension: Multi link solid axle 4-link optimized to reduce axle steer and torque twist
Drivetrain: 4WD Shaft Drive
Tire Type: Licensed Nitto Grappler, aggressive large block tread design, foam inserts, Mounting Bead Diameter 1.9" (48.2mm), Outer Diameter 4.7" (119.4mm)
Motor or Engine: 540 size motor, 35T brush equipped, integrated cooling fan
Speed Control: Dynamite AE-5L 3S capable Forward/Reverse with drag brake, switchable between LiPo & NiMH batteries with a jumper, LED light controller with headlight/ taillight outputs
Radio: Spektrum FHSS 2.4GHz STX2 2-ch with 3-position throttle limiter, steering & throttle rate and trim adjustments, high torque (151 oz-in) water resistant, dual ball bearing steering servo
Servos: Tactic TSX45 high-torque metal gear dual ball bearing steering servo
Batteries: One 2-3S LiPo battery w/IC3 connector, or one 5-9 cell NiMH battery w/IC3 connector required
Charger: Compatible with selected battery
Gear Pitch: 32-Pitch
Wheel Size: 2.12" (53.9mm) Diameter, 1.2" (26mm) Width, 12mm Hex
Kit/RTR: RTR
Shock Type: Clear coated polished aluminum body oil-filled King shocks with precision machined pistons, pre-load tuning and ride height adjustable
Body: Molded polycarbonate with plastic grille and molded plastic inner fender wells
Ball Bearings: Full set included
Assembly Time: Less than 1 Hour
Includes:
Needed To Complete: