Axial #AXI00006V2T6 1/24 SCX24 Ford Bronco Heritage-Red

Axial #AXI00006V2T6 1/24 SCX24 Ford Bronco Heritage Edition 4X4 RTR Brushed Rock Crawler (Battery & Charger Included), Red

Now with oil-filled shocks, high-quality Spektrum™ electronics, and three fresh color options, the Axial® SCX24™ Ford Bronco RTR delivers even better value and performance in an officially licensed, 1/24 scale rig that you can run almost anywhere.

Axial SCX24 Ford Bronco 4X4 RTR Overview
Ford Motor Company produced five generations of its successful first SUV, the Bronco, between 1966 and 1996. Twenty-five years later, a sixth generation quickly re-established the 2021 Ford Bronco as one of the auto industry’s premier off-road vehicles.

With its proven performance on indoor and outdoor trails, the Axial® 1/24 scale SCX24™ is the ideal platform for bringing the Ford Bronco to Ford fans and RC crawling enthusiasts of all ages. Everyone will admire the scale realism of its officially licensed, highly detailed hard body -complete with molded door handles, mirrors, roof rails, and a mounted spare tire.

“Complete” also accurately describes the Axial SCX24 Ford Bronco ready-to-run package. Inside the box you’ll find the fully assembled rig plus everything required for operation, all at one affordable price. For even greater value, Axial now includes top-of-the-line Spektrum™ electronics and plush, oil-filled shocks that provide stable handling over the roughest terrain.

The SCX24 Bronco chassis meets every on- and off-road driving challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Rugged and realistic steel C-channel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles, and steel dogbones let you crawl and climb with confidence. A Dynamite™ 88-turn brushed motor sends ample power to officially licensed wheels and high-grip Nitto Trail Grappler M/T tires.

Ready for an adventure? You can start yours almost immediately. The Axial SCX24 Ford Bronco RTR comes with everything you need — a Spektrum SLT2™ 2.4GHz radio, Spektrum 350mAh 2S 30C 7.4V LiPo battery, handy Spektrum USB LiPo charger, and four AA batteries for the transmitter. Just pick your favorite of the three new body color options and choose your trail. The SCX24 Bronco is a must for Ford enthusiasts, and an essential addition to every Axial fan’s fleet!

Axial SCX24 Ford Bronco 4X4 RTR Features
Fully equipped and ready-to-run
Officially licensed Ford Bronco hard body
Assembled SCX24 chassis, drivetrain, and suspension
Oil-filled shocks
Spektrum SLT2 2.4GHz radio system
Spektrum 350mAh LiPo battery
Spektrum USB LiPo battery charger
Realistic and durable steel C-channel frame rails
True full-time 4-wheel drive
Dynamite 88-Turn brushed motor
Durable solid axle front and rear suspension
Durable steel axles
Nitto Trail Grappler M/T tires
Working front lights, with molded lenses on all four corners
2-Year limited warranty (see product manual for details)
OFFICIALLY LICENSED FORD BRONCO HARD BODY for the Axial SCX24 Ford Bronco

The Axial SCX24 Ford Bronco achieves a high level of scale realism with its officially licensed, exceptionally detailed, extra-durable hard body with molded door handles, mirrors, and roof rails. There’s also a mounted spare tire.

OFFICIALLY LICENSED NITTO TRAIL GRAPPLER M/T TIRES
Complementing the exceptional detail of the scale hard body, Axial has outfitted the SCX24 Ford Bronco with officially licensed Nitto Trail Grappler M/T tires. They offer a fantastic blend of off-road performance while retaining excellent composure for on-road use.

SPEKTRUM SLT2 2.4GHz RADIO SYSTEM
The Spektrum SLT2 2-channel radio system offers high-end features such as throttle/steering travel adjust and throttle limiting. The RTR package also includes AA transmitter batteries.

STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned.

DYNAMITE BRUSHED MOTOR
The included Dynamite 88T brushed motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and protect the gears.

FULL BALL BEARINGS
Just because the SCX24 is small doesn't mean its features follow suit. There are no bushings here - the drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle.

FRONT AND REAR SOLID AXLE HOUSINGS
The front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a three-link front and four-link rear setup.

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles and steel dogbones provide the strength needed to keep running with confidence during tough climbs and over rough trails.

SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.

4-LINK REAR SUSPENSION
The rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist.

LIGHTS AND MOLDED LENSES
For maximum realism, working lights are included on the front corners of the scale Ford Bronco body and in the front bumper. All four corners of the body feature molded lenses.

OIL-FILLED SHOCKS
Oil-filled shocks allow the suspension to articulate smoothly over rough terrain. You can adjust the preload to fine-tune your rig for your handling needs.

NEW BODY MOUNT SYSTEM
A new body mounting system allows fast, easy access to the chassis for battery replacement and general maintenance.

SPECIFICATIONS:

Ball Bearings                                                  Full
Battery                                                        Included
Body                                                 Axial Ford Bronco Hard Body
Charger                                                       Included
Chassis                                            Stamped Steel Chassis Rails
Completion Level                                    Ready-To-Run
Differential                                            Worm Gear 16T/2T
Drivetrain                                                       4WD
Front Track                                            3.938 in (100mm)
Inner Tire / Outer Wheel Diameter                 1.0 in
Motor Size                                                       030
Motor Type                                                     Brushed
Pinion                                                               10T
Product Height                                          4.625 in (117.5 mm)
Product Length                                           8.75 in (222.3 mm)
Product Width                                             3.875 in (98.4 mm)
Radio                                                              Included
Rear Track                                                    3.938 in (100mm)
Scale                                                                 1/24
Servos                                                           Included
Shock Type                                              Oil-Filled Coil-Over
Speed Control                                                 Included
Spur Gear                                                           55T
Suspension                                        Solid Axle, Front and Rear
Tire Tread                                       Nitto Trail Grappler M/T Tires
Wheelbase                                            5.19 in (131.8mm)

Product Details
 In The Box
(1) Axial SCX24 Ford Bronco 4WD RTR
(1) Assembled SCX24 chassis, drivetrain, and suspension
(1) Spektrum SLT2 2.4GHz radio system
(1) Spektrum 350mAh LiPo battery and USB charger
(4) AA transmitter batteries
(1) Product manual
 Needed to Complete
Absolutely nothing!