Futaba # 6KA 8-Channel T-FHSS Air System w/R3006SB Receiver - Airplane (Mode 1)
Futaba 6CH 6K 2.4GHz Transmitter with T-FHSS R3006SB, MODE 1
An incredible value in 6-channel control
You'll be hard pressed to find another 6-channel system with as many functions as the 6K at a comparable price. Telemetry sensors monitor critical flight data, including temperature, RPM, altitude, receiver battery voltage, external voltage and variometer. It's compatible with S.Bus and S.Bus2 servos, and setting functions can be programmed through the transmitter. Controls are positioned to be within easy reach, and the menu is a breeze to navigate. Throw in other features such as 30 model memory, a 128x64 DOT backlit LCD screen and updateable software, and it's easy to see how the 6K is a lot of radio for the money.
System features
S-FHSS/T-FHSS selectable
Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer
Built-in antenna
S.Bus/S.Bus2 servo setting functions programmable through the transmitter
Preset vibration alarms
30 model memory
8-character model/user naming
Programmable mixes for airplanes, helicopters, gliders and multi-rotors
Digital trims with variable step settings
Adjustable stick length and tension
Changeable switch/VR position and AUX channel function
Throttle position warning
Backlit 128x64 DOT LCD screen with adjustable display contrast
Software updateable through the CIU-2
Screen Lock
Earphone/S.Bus/Trainer jacks
Assignable switches (three 3-position, one 2-position)
Range Check
Program navigation bay with jog dial, +/- pads and end pad
Data reset
Model copy
Selectable model type
Fail Safe
End Points
Trim/Trim Resets/Trim Steps
Sub Trim
Servo Reversing
Parameter functions
Servo monitor/Test
Wireless model data transfer
Timer-System and Model (Up/Down)
Trainer system
spacer Airplane Functions
Wing Type (5-wing, 2-tail)
Throttle Cut
Dual Rate/Expo
Throttle Curve
Idle down
Gyro
Aileron differential
V-Tail
Camber
Air Brake
Elevator-to-Flap mixing
Flap-to-Elevator mixing
Elevon mixing
Glider Functions
Wing Type (5-Wing, 2-Tail)
Condition select
Dual Rate/Expo
Motor switch
Gyro
Aileron Differential
V-tail
Butterfly mixing
Trim mixing
Elevator-to-Camber mixing
Camber mixing
Aileron-to-Camber mixing
spacer Helicopter Functions
Swash type (6)
Condition Select
Throttle Cut
Dual Rate/Expo
Trim Offset
Delay
Gyro mixing
Swash AFR
Swash mixing
Throttle Curve (5-point)
Pitch Curve (5-point)
Pitch-to-Rudder mixing
Throttle Hold
Hovering throttle
Hovering pitch
Multicopter Functions
Flight Mode
Center alarm
Dual Rate/Expo
Throttle Curve
Throttle Delay
Gyro
2.4GHz S-FHSS 2.4GHz T-FHSS S.Bus
R3006SB spacer The R3006SB receiver can use S.Bus as the main link/communication to the servos or a combination of S.Bus and the conventional outputs together. It features 6 standard PWM outputs in addition to S.Bus and S.Bus-2 outputs.Features bi-directional communication with a T-FHSS Air Futaba transmitter using the S.BUS2 port. Using the S.BUS2 port with an impressive array of telemetry sensors may be utilized. futk6100
The versatile 6K meets the control needs of a wide range of R/C pilots!
Program navigation is easy and intuitive with the jog dial, +/- pads and end pad.
spacer
internal antenna
The antenna is inside the transmitter case for safety and handling convenience. spacer
variable rate dial and speaker vents
This variable rate dial can be programmed to perform different functions; a speaker allows for telemetry voice feedback and audio alarms.
switches
Four assignable switches (three 3-position and one 2-position) offer maximum flexibility. spacer
earplug/trainer/S.Bus ports
The earplug/trainer/S.Bus ports are all conveniently located.Requirements:
4 “AA” cells
Servos
Transmitter Specifications:
Type: 2-stick, 6-channel, T-FHSS/S-FHSS selectable
Power Supply: Optional 6V Nimh's or 6.6V Lithium (LiFe) batteries
R3006SB Receiver Specifications:
R3006SB 2.4GHz T-FHSS S.Bus
Type: Full-range flight receiver
Modes: S-FHSS or T-FHSS
Features: bi-directional communication with a T-FHSS transmitter to utilize an array of telemetry sensors, S.Bus and S.Bus2 ports, along with 6 standard PWM outputs
Voltage Input: 4.8V-7.4V
Dimensions: 1.7 x 0.98 x 0.35 in (43 x 25 x 8.8 mm)
Weight: 0.3 oz (8.5 g)