Tamiya #58489 Avante 4WD (2011) Kit

SKU:
4950344584895
$849.00
(No reviews yet) Write a Review
Current Stock:

Out of stock

Out of Stock

Tamiya #58489 Avante 4WD (2011) Kit

This is a re-release of a Tamiya Radio Control classic! In March 1988, Tamiya released an electric R/C 4WD racing buggy called the "Avante" and it has since become a special machine in Tamiya"s R/C history. The machine featured a unique shaft-driven 4WD system which was taken from Tamiya"s first 4WD R/C buggy, the Hotshot. It also featured a highly sophisticated design including a FRP double-deck chassis layout, longitudinal motor & battery positions, and a formula-type body with chassis fairing. It was equipped with innovative components such as a compact gearbox with 3 small planetary gears, a center diff to increase stability, a fully adjustable suspension, and cam-lock wheel caps.

In 2011 the Avante made its return to the Tamiya library of R/C car offerings. It has a few updates, such as universal drive-shafts and machined aluminum uprights, to give the 2011 version increased durability and performance over the original. The Avante was such a distinctive R/C machine, many of its mechanisms have become standard features on modern R/C cars.

High Performance Racing 4WD Chassis
Shaft-driven 4WD chassis features a longitudinally-placed motor and a new 2mm thick carbon fiber double deck setup which replaces the original FRP decks for increased strength. The FRP rear damper stay has been changed to a 3.5mm thick carbon fiber part to improve rigidity. Just like the original, the 4WD system adopts a front and rear planetary diffs and a center ball diff setup. A total of 23 ball bearings are used to minimize friction loss. In addition, the front and rear gearboxes come with three convenient hatches to allow you to check the gear condition and perform simple maintenance. 4-wheel double wishbone suspension features metal threaded shafts with ball-ends to enable fine-tune the suspension. Original die-cast front knuckles are changed to aluminum ones which feature the same shape as the original. Other features of the original, including radius arm protector which absorbs shocks to protect the suspension arms from damage and cam-loc wheel caps that securely hold the wheels in place remain the same. With all these new improvements, you will enjoy hours of fun driving the high performance of Avante (2011) just like the original.

Features:

  • Main frame material has been changed from FRP to carbon fiber. Original FRP upper/lower decks have been replaced with 2.0mm thick carbon fiber decks to further increase chassis strength and rigidity. Chassis layout is optimized for installing modern R/C equipment.
  • Carbon Fiber Rear Damper Stay Rear damper stay is thicker than the original and its material has also been changed to carbon fiber. Left and right stays are connected to further increase rigidity.
  • Assembly Universal Shafts WO universal shafts are used for both front and rear to reduce friction loss.
  • Easier Damper Maintenance The gold-colored oil damper cylinders feature bottom caps for easier maintenance such as replacing o-rings.
    Durable Polycarbonate Body Shell The body, wing, and chassis fairing have been made with polycarbonate for superb off-road durability.
  • Wheel Axle/Clamp Type Wheel Hubs Wheel axles have been changed to standard pin-secured type. In conjunction with aluminum wheel hubs, secure wheel attachment is possible. The hex wheel hubs enable attachment of off-road wheels such as Item 53880 Large Dish Wheels (4WD/Front, 62/25) and Item 53881 Large Dish Wheels (Rear, 62/35) in addition to the original cam-lock type wheels.
  • Duralumin front knuckles The original die-cast front knuckles have been replaced with duralumin knuckles to further increase strength and durability. New knuckles feature the same shape as the original.
  • Compatible with a wide range of battery packs. The Avante (2011) is compatible with a wide range of Tamiya battery products such as Ni-Cd, high-capacity Ni-MH, and lightweight LF battery packs.
  • Latest R/C Systems The Avante is compatible with all Tamiya R/C systems including the 2.4GHz systems.
  • The Original Packaging is also Revived! The package for this re-release model comes with the same design and dimensions as the original Avante. In addition, just like the original Avante, all the parts are stored in blister packs. The Avante logo and rear wing sticker will remain the same as the original. Other stickers will be of a new Tamiya design.

  • ●Length: 420mm, Width: 240mm, Height: 140mm ●Wheelbase: 260mm ●Tread F/R: 200mm ●Tire Width/Diameter: 38/88mm ●Chassis: 2mm Thick Carbon Double Deck ●Longitudinally-Placed Motor Shaft-Driven Full-Time 4WD ●Diff Gear F/R: Planetary, Center: Ball Diff ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front & Rear Oil Dampers ●Gear Ratio=8.33:1 ●Type 540 Motor (25T) ●Requires an Electronic Speed Controller (sold separately)

    Requires: 2-channel radio, servo, ESC, 7.2 volt battery & compatible battery charger, and Tamiya PS polycarbonate paint