INJORA # MBL32G2-INM19-SCX24   MBL32 G2 Waterproof Brushless ESC & 1721 Purple Viper Motor

SKU:
MBL32G2-INM19-SCX24
$124.90
(No reviews yet) Write a Review
Current Stock:
1

INJORA # MBL32G2-INM19-SCX24   MBL32 G2 Waterproof Brushless ESC & 1721 Purple Viper Motor for 1/24 SCX24

INJORA MBL32 G2 Waterproof Brushless ESC & 1721 Purple Viper Outrunner Motor for 1/24 Axial SCX24 Upgrade

Note:

Programming Tutorial
Please do not flash or modify the firmware by yourself. Any damage caused by unauthorized firmware flashing or modification is not covered under INJORA warranty.
Compatibility Notice:

Compatible with 1/24 SCX24
Radio system: Not compatible with the stock SCX24 radio. Requires a new transmitter and receiver (with CH2).
Transmission: Only compatible with stock SCX24 transmission and INJORA metal transmission
Chassis: Not compatible with carbon fiber chassis with angled skid plate. For stock SCX24 chassis, the ESC tray must be trimmed to fit the motor.
Note: 

Some noise at mid-throttle is normal for the 1721 motor due to its high-speed, open-rotor design. This does not indicate a defect.
The 1721 Purple Viper is best for rigs under 700g. For heavier rigs, we recommend the 2204 Fat Viper for stronger drag brake performance.
Features:

The INJORA MBL32 G2, based on the AM32 firmware, is meticulously tailored for Micro crawlers and is programmable.
Smooth and linear at low speeds, powerful and aggressive at high speeds. Runs more quietly than brushed systems, producing virtually no noise.
MBL32 G2 features a built-in BEC with adjustable output: 6V/7.4V
Waterproof Design for all-weather performance.
Supports PC Programming via USB programmer card. Factory settings are optimized for INJORA 1721/2204 motors—adjustments are not recommended.
Multiple Protections: Low-voltage, fail-safe, and rotor lock protection.
1721 Purple Viper outrunner motor, equipped with a mounting plate to install on SCX24.
ESC Specifications:

Part Number: MBL32 G2
LiPo Cells: 2-3S
Continuous Current: 25A
Peak Current: 60A
BEC Output: 6.0V/7.4V adjustable
BEC Current: 3A
Dimensions (L*W*H): 30*19*12mm
App Tuning: Not Supported
Weight: 0.45oz (13g)
Waterproof: Yes
Motor Specifications:

Model Number: 1721
Motor Type: Sensorless Brushless Outrunner
RPM/Volt: 2800KV
Motor Poles: 14
Motor Slots: 12
No-Load Current (11.1V): 0.7A
Max Current: 20A
Motor Connectors: PH2.0 3Pin
Dimensions: Φ16.7*20.9mm
Motor Output Shaft: Φ1.7mm
Motor Pinion: 0.3mod 12T
Weight: 19g
Waterproof: Yes
Package List:
1 * Micro Brushless ESC
1 * USB programmer Card
1 * 1721 Purple Viper Motor
1 * Receiver Connector Cable
1 * Battery Adapter Cable (Female XT30 to Male TRX-4M)
1 * Battery Adapter Cable (Female XT30 to Male JST-PH2.0)
1 * Instruction Manual